C9300L-24UXG2Q-10E Specification |
||
Product Description | Cisco Catalyst 9300L – Network Essentials – switch – 24 ports – managed – rack-mountable | |
Device Type | Switch – 24 ports – L3 – managed – stackable | |
Enclosure Type | Rack-mountable | |
Bundled Services | 10 years Network Essentials | |
Subtype | Gigabit Ethernet | |
Ports | 16 x 10/100/1000 (UPOE) + 2 x 40Gb Ethernet + 8 x 1/2.5/5/10GBase-T | |
Power Over Ethernet (PoE) | UPOE | |
Performance | Switching capacity: 352 Gbps Switching capacity with stacking: 672 Gbps Forwarding rate: 261.9 Mpps Forwarding rate with stacking: 500 Mpps |
|
Capacity | IPv4 routes: 32000 IPv6 routes: 16000 Multicast scale: 8000 QoS scale entries: 5120 ACL scale entries: 5120 VLANs supported: 4094 Switched virtual interfaces (SVIs): 1000 |
|
MAC Address Table Size | 32000 entries | |
Jumbo Frame Support | 9198 bytes | |
Features | Access Control List (ACL) support, Quality of Service (QoS), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), PXE support, Energy Efficient Ethernet, Class of Service (CoS), Flexible NetFlow (FNF), 802.1x authentication, 16MB packet buffer, DiffServ Code Point (DSCP) support, MACsec support, Control plane protection (CoPP), Blue Beacon LED, Zero-touch provisioning (ZTP), secure boot, Protocol Independent Multicast (PIM), First Hop Security (FHS), PVLAN support, Committed Information Rate (CIR), Cisco Trust Anchor module, Cisco Unified Access Data Plane (UADP) 2.0, Cisco StackWise-320 technology | |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae, IEEE 1588v2, IEEE 802.1BA, IEEE 802.3bt, Wi-Fi CERTIFIED 6 | |
Power | AC 100-240 V (50 – 60 Hz) | |
Power Redundancy | Optional | |
Dimensions (WxDxH) | 17.5 in x 1.7 in x 19.2 in | |
Manufacturer Warranty | Limited lifetime warranty | |
General | ||
Device Type | Switch – 24 ports – L3 – managed – stackable | |
Bundled Services | 10 years Network Essentials | |
Enclosure Type | Rack-mountable | |
Subtype | Gigabit Ethernet | |
Ports | 16 x 10/100/1000 (UPOE) + 2 x 40Gb Ethernet + 8 x 1/2.5/5/10GBase-T | |
Power Over Ethernet (PoE) | UPOE | |
PoE Budget | 722 W | |
Performance | Switching capacity: 352 Gbps Switching capacity with stacking: 672 Gbps Forwarding rate: 261.9 Mpps Forwarding rate with stacking: 500 Mpps |
|
Capacity | IPv4 routes: 32000 IPv6 routes: 16000 Multicast scale: 8000 QoS scale entries: 5120 ACL scale entries: 5120 VLANs supported: 4094 Switched virtual interfaces (SVIs): 1000 |
|
MAC Address Table Size | 32000 entries | |
Jumbo Frame Support | 9198 bytes | |
Routing Protocol | OSPF, RIP-1, RIP-2, EIGRP, VRRP, PIM-SM, EIGRP for IPv6, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng, MSTP | |
Remote Management Protocol | SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF, gRPC, IPv4, IPv6, YANG | |
Encryption Algorithm | 128-bit AES, 256-bit AES | |
Features | Access Control List (ACL) support, Quality of Service (QoS), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), PXE support, Energy Efficient Ethernet, Class of Service (CoS), Flexible NetFlow (FNF), 802.1x authentication, 16MB packet buffer, DiffServ Code Point (DSCP) support, MACsec support, Control plane protection (CoPP), Blue Beacon LED, Zero-touch provisioning (ZTP), secure boot, Protocol Independent Multicast (PIM), First Hop Security (FHS), PVLAN support, Committed Information Rate (CIR), Cisco Trust Anchor module, Cisco Unified Access Data Plane (UADP) 2.0, Cisco StackWise-320 technology | |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae, IEEE 1588v2, IEEE 802.1BA, IEEE 802.3bt, Wi-Fi CERTIFIED 6 | |
RAM | 8 GB | |
Flash Memory | 16 GB | |
Sta tus Indicators | Status | |
Expansion / Connectivity | ||
Inte rfaces | 16 x 1000Base-T RJ-45 60 W 2 x 40Gbit LAN uplink 1 x network stack device 1 x management (LAN) RJ-45 1 x console 1 x USB 2.0 8 x 1/2.5/5/10GBase-T RJ-45 |
|
Power | ||
Power Device | Internal power supply – hot-plug | |
Installed Qty | 1 (installed) / 2 (max) | |
Power Redundancy | Optional | |
Power Provided | 1100 Watt | |
Voltage Required | AC 100-240 V (50 – 60 Hz) | |
Miscellaneous | ||
MTBF | 291,670 hours | |
Compliant Standards | CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN 61000-6-1, AS/NZS 60950-1, CCC, ICES-003 Class A, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, AS/NZS 3548 Class A, BSMI Class A, VCCI Class A, CNS 13438, EN 55022 Class A, FCC CFR47 Part 15 B Class A, EN 300 386, KN32, KN35, EN 55032 Class A, CISPR 32 Class A, CAN/CSA-C22.2 No. 60950-1, TCVN 7189 Class A, V-3 Class A, TCVN 7317, CISPR 35 | |
Dimensions | ||
Width | 17.5 in | |
Depth | 1.7 in | |
Height | 19.2 in | |
Environmental Parameters | ||
Min Operating Temperature | 23 °F | |
Max Operating Temperature | 113 °F | |
Humidity Range Operating | 5 – 90% (non-condensing) | |
Min Storage Temperature | -40 °F | |
Max Storage Temperature | 158 °F |
FREE SHIPPING
For Selected Orders.
SECURE PAYMENT
Cash on Delivery.
24/7 SUPPORT
Unlimited help desk.
100% SAFE
View our benefits.
FREE RETURNS
Track or cancel orders.