Cisco PA-2FE-TX:
- 2 ports
- 10/100BASE-TX
- RJ-45
- Cisco IOS Software Release 12.1(3)[FC] or later
- IEEE 802.3x flow control
- Full-duplex operation
- Supports a variety of network management protocols, including SNMP, CLI, and syslog
- Hot-swappable and field-replaceable unit
The Cisco PA-2FE-TX is a 2-port 10/100BASE-TX port adapter for the Cisco 7200 Series routers. It provides 2 non-blocking 10/100BASE-TX ports and supports full-duplex operation. The port adapter also supports a variety of network management protocols, including SNMP, CLI, and syslog. It is a hot-swappable and field-replaceable unit.
Here are some of the key benefits of the Cisco PA-2FE-TX:
- It provides high-speed and reliable connectivity for enterprise and commercial networks.
- It supports full-duplex operation, which allows you to achieve the maximum throughput of the ports.
- It supports a variety of network management protocols, which makes it easy to monitor and manage your network.
- It is a hot-swappable and field-replaceable unit, which minimizes downtime in the event of a failure.
If you are looking for a high-performance and reliable port adapter for your Cisco 7200 Series router, the Cisco PA-2FE-TX is a good option.
Here are some additional details about the Cisco PA-2FE-TX:
- It supports a line-rate of 200 Mbps per port.
- It has a rated MTBF of 500,000 hours.
- It is a half-height, half-width card.
- It consumes 10 watts of power.
The Cisco PA-2FE-TX is a reliable and efficient port adapter that can help to keep your Cisco 7200 Series routers running cool and quiet.
The main difference between the Cisco PA-2FE-TX and the Cisco PA-2FE-FX is that the Cisco PA-2FE-TX is a 10/100BASE-TX port adapter, while the Cisco PA-2FE-FX is a 10/100/1000BASE-FX port adapter. This means that the Cisco PA-2FE-FX can support speeds up to 1 Gbps, while the Cisco PA-2FE-TX is limited to 100 Mbps. However, the Cisco PA-2FE-TX is a more cost-effective option, as it does not require the use of 1 Gbps transceivers.
Ultimately, the best choice for you will depend on your specific needs and requirements. If you need to support speeds up to 1 Gbps, then the Cisco PA-2FE-FX is a good option. However, if you are looking for a more cost-effective option, then the Cisco PA-2FE-TX is a good choice.
